Hey all, Need some help, i have a Arduino Nano, and want to program the fuses. I connect my usbtiny to the arduino on the 6 pins at the back. I downloaded avrdude and run the command like this avrdude -c usbtiny -p m328p -U lfuse:w:0xee:m -U hfuse:w:0xdf:m -U efuse:w:0xff:m it will program but on th...

Hello, if I have an eprom programmer that can program ATtiny45/85, is there a hex file somewhere for psnee? I'm an Arduino noob and would rather not have to buy the Arduino Uno just to program the ATtiny45 if my eprom programmer can do the same thing.. ty in advance. Hey, I am not sure but I think ...

Hello,

I have read the post, and I am a little bit confused.
As far as I understand the most points are the same as with the Psnee v7

VCC
SQCK
SUBQ
DATA
GATE_WFCK
GRD

But where are the points AX-BIOS, AY-BIOS and DX-BIOS on the PlayStation motherboards?

Hello,

I just wanted to say thanks again for this amazing code, I have done many playstation with is,
and it all works perfect!

I also wanted to share with you my new setup for flashing the Nano chips. this make programming the chips
so much easier and take only seconds !

Hello, So this morning after installing windows 98 for the 7th time (no joke) I was ready to do some dumping. X-killer worked like a charm and i dumped my rom 3 times as .bin and three times like .rom. I hope the dumps are good, i did not flash my card yet. I also tried to dump the gamars psx-003. I...

I got the pc today but I don’t have time for it until the weekend. Also need to install windows 98 on it(ahh good times). I also checked the other cart and it is a Gamars psx-003. If I see correctly it’s a version 0.1 ntsc. It also only have ntsc and jap cheats on it But it looks like it has nev...

I spend almost all Monday trying to get windows 98 installed on al old laptop. Only to found out it does not have a parallel port, I would swear it had one :/. So I bought an old windows 98 retro (gaming) PC, I hope to dump the rom this weekend. I also got an sort of cart/video vcd player it’s a l...

Oh it's an early undumped Dutch rom version you have there so it would be interesting to backup it first. :) But that currently requires old hardware/software (that i have) to do that. Do you have access to an old Win98 machine with a parallel port ? As for flashing it, i can help you but only with...

Squaresoft74 wrote: ↑April 22nd, 2019, 4:02 am Is this a regular Xplorer or an FX one ?
Can you post your current rom version infos ? (just hit select while on main menu)

Sure here is the picture, Its A regular xplorer.

Hello, I have a question, I have a Xplorer and years ago deleted a lot of cheats from it. Now I want to flash the old rom back to it, but I am not sure how to do this safely, does any one have any tips ? Also is it possible to remove the SST 29ee20 chip and solder in a other one (or dual rom) and fl...

Well, as I warned in the other thread: This mod will give you color, but it will look very bad. Moving dot crawl all over the screen bad. If you want to sell the console, it's better to just include an RGB cable. As far as I know, these mods aren't being made anymore. You'd have to build it yoursel...

http://www.psxdev.net/forum/download/file.php?mode=view&id=445&sid=3903d2bf2a7ab2faaf80495b020c3c4b You don't have to use a crystal oscillator if you know how to build a simple XTAL based oscillator, but a sealed oscillator will always provide a much more accurate running clock :) The 'QXO-...

Hey rama3, Do you have a link to the guide for this. Like I said I try lifting pin 157 and grounding it but it did Not work :) postal2201: Some ideas are good, just need to implement them :p - The oscillator mod won't fit onto ATtiny: No pins left. - Automatic region detect sounds doable. Not sure h...

Thanks for the update, I have a question tho, I have a pal pu-18. Dan the chip is working fine. I just get a black and white picture on ntsc games. After doing the googlie I found a mod, lifting pin 157 of the you and Soldering a wire of the via to ground. I did this but still have the same black an...

I know it's a overkill but for some reason this is the only way it will program without any problem. If I connect it like you say I get only error's I've been trying for two weeks now without success, as soon as I ask it here I find out how to program them. What I did is connect the ground on the UN...

I've been trying for two weeks now without success, as soon as I ask it here I find out how to program them. What I did is connect the ground on the UNO to the Reset on the UNO. as soon as they say there uploading I have to hit the reset on the Pro mini. Than it program's I modded one of the PSX's (...

Hello

I have a problem programming the Pro mini, for some reason with Arduino IDE it fails to program the chip.
Does any one have a similar problem, I can program the Arduino Nano without a problem.

I modded my PSX and PS one with it and it works perfectly.